• 销售:18660171507 (张经理)
  • 传真:0531-68850070
  • 地址:济南市历城区开源路17号
新闻资讯当前位置:首页-新闻资讯
    小型数控超声波清洗机正确操作
    2016-12-27 15:15:09
    1、开箱后,检查零件有否松脱;
    1, after the opening, check whether there is loose parts;
    2、机器放置在通风干燥的地方,确保机器处于水平位置;
    2, the machine placed in ventilated dry place, ensure the machine in horizontal position;
    3、按清洗所需加入适量的清洗液于清洗槽内;
    3, according to the cleaning need to add appropriate cleaning fluid in the cleaning tank;
    4、正确连接电源插头:请务必确保所供电源可靠接地!
    4, the correct connection power plug: please be sure to provide reliable grounding power supply!
    5、调节超声波工作时间:
    5, adjust ultrasonic working time:
    打开电源开关,通电后,时间显示屏均显示“05 00”。每按时间Δ键一次,时间增加1分钟; 每按时间▽键一次,时间可减少1分钟。(可自由选择并数码倒计时控制。)
    Open the power switch, power, the time display are shown "0500". Every time according to the delta key once the time increase 1 minutes every time; press button once, time can be reduced by 1 minutes. Free choice and digital countdown control.
    6、调节工作温度(如有需要再选择加热):
    6, adjust the working temperature (if necessary, then choose heating):
    通上电源后,温度设置屏与实际温度屏分别显示“50”和“实际温度数”。每按温度Δ键一次,温度上调1°C; 每按温度▽键一次,温度下调1°C。当低于实际温度时,操作无效。当温度达到设定温度时,加热指示灯灭。超声波工作时,两个温度显示屏处分别显示所设置的温度及实际已达到的温度。
    After the power is turned on, the temperature setting screen and the actual temperature screen respectively display "50" and "actual temperature". According to the temperature of each delta key once, the temperature increase of 1 degrees C; each according to the temperature button once, the temperature by 1 degrees C. When the actual temperature is below, the operation is invalid. When the temperature reaches the set temperature, the heating indicator lights off. Ultrasonic work, the two temperature display at the display of the set temperature and the actual temperature has been reached.
    7、设定好工作时间和温度后,轻按ON/OFF一下,机器按商定参数工作。再按ON/OFF一下,机器停止工作。然后断开整机电源,倒掉清洗液,用干净抹布对槽体及外围进行清洁保养,以备下一次使用。
    7, set a good working time and temperature, light press ON/OFF, the machine work according to agreed parameters. Press ON/OFF again, the machine stops working. Then disconnect the power, pour the cleaning liquid for cleaning and maintenance of the body and the periphery with a clean cloth, for the next time.
    就先介绍到这里了,相信大家在实际的工作中会用到全自动超声波清洗机 http://www.sinokohl.com相关知识,如果您有这方面的需要,欢迎前来咨询。
    First introduced here, I believe we will in the actual work will use automatic ultrasonic cleaning machine http://www.sinokohl.com related knowledge, if you have this need, welcome to consult.