• 销售:18660171507 (张经理)
  • 传真:0531-68850070
  • 地址:济南市历城区开源路17号
新闻资讯当前位置:首页-新闻资讯
    如何正确给科尔超声波安装高压清洗机泵?
    2016-11-22 16:10:04
    1、高压清洗机泵安装在水平放置,安装前应仔细检查各部位,在完好无损的情况下方可进行安装。
    1, high pressure cleaning machine pump installed in the level of placement, should carefully check the parts before installation, in the case of the condition can be installed.
    2、高压清洗机泵安装时其吸入管路应尽可能短,最大长度不要超过6米,并且用适当长的软管来隔离机械振动。
    2, high pressure cleaning machine pump installation when the suction line should be as short as possible, the maximum length of not more than 6 meters, and with the appropriate length of the hose to isolate the mechanical vibration.
    3、清洗泵的吸入管径应大于或等于泵头的进液管径,为保证泵的工作可靠,进水管路压力约为0.2~0.35MPa,其流量为泵输出流量的1.5~2倍,且通径不小于50mm。
    3, cleaning the suction inlet pipe diameter should be greater than or equal to the pump, to ensure that the pump work is reliable, the inlet pipeline pressure is about 0.2~0.35MPa, the flow rate is 1.5~2 times the pump output flow, and the diameter not less than 50mm.
    4、为了维护方便,泵的四周必须留有一定的空间场地,便于更换真料、滋润油等,并监护泵的运转状况。
    4, in order to maintain convenient, the pump must be left around a certain space, easy to replace the real material, moisturizing oil, and monitor the operation of the pump.
    5、高压清洗机泵与其他作业机械配套使用时,必须安装牢固。泵机组为固定作业机械使用时,除安装基础牢固外,安装基面也要保持水平。
    5, high pressure cleaning machine pump and other operating machinery matching use, must be firmly installed. Pump unit for fixed machinery use, in addition to the installation base, also to maintain the level of installation.
    本文文章来源:喷淋清洗机更多的内容请进入:http://www.sinokohl.com/ 我们的官方网站。
    Article source: spray cleaning machine more content please enter: http://www.sinokohl.com/ our official website.