• 销售:18660171507 (张经理)
  • 传真:0531-68850070
  • 地址:济南市历城区开源路17号
新闻资讯当前位置:首页-新闻资讯
    使用高压清洗机要注意什么?
    2018-11-14 17:26:52
    众说周知,高压电是一个非常的危险的事情,而高压清洗机的动力在于电压,所以我们在操作高压清洗机时特别要注意安全。下面为您列出一些在操作过程中的注意事项。
    It is well known that high-voltage electricity is a very dangerous thing, and the power of high-voltage cleaning machine lies in voltage, so we should pay special attention to safety when operating high-voltage cleaning machine. Below you list some matters needing attention in the course of operation.
    1、在接通供应水并让适当的水流过喷枪杆之前,决不要启动设备。然后将所需要的清洗喷嘴连接到喷枪杆上。
    1, never turn on the equipment before connecting the supply water and letting the appropriate water flow through the gun. Then connect the required cleaning nozzle to the spray gun lever.
    2、当未使用喷枪时,总是需将设置扳机处于安全锁定状态。
    2, when the spray gun is not used, it is always necessary to set the trigger in a safe locking state.
    3、当操作高压清洗机时:始终需戴适当的护目镜,手套和面具。
    3, when operating the high pressure washer, always wear appropriate goggles, gloves and masks.

    4、经常检查软管是否有裂缝和泄漏处。

    超声波清洗机生产厂家

    4, check the hose regularly for cracks and leakage.
    5、·经常要检查所有的电接头。
    5. Always check all electrical connectors.
    6、在检查所有软管接头都已在原位锁定之前,决不要启动设备。
    6, do not start the equipment before checking that all hose connectors have been locked in place.
    7、每次使用后总是要排干净软管里的水。
    7, always clean the water in the hose after each use.
    8、始终让保持手和脚不接触清洗喷嘴。
    8, always keep the hands and feet in contact with the nozzles.
    9、总是尽可能地使用最低压力来工作,但这个压力要能足以完成工作。
    9, always use the lowest pressure to work as much as possible, but the pressure should be enough to complete the work.
    10、绝不要将喷枪对着自己或其他人。
    10, never put a spray gun on yourself or anyone else.
    11·在断开软管连接之前,总是要先释放掉清洗机里的压力。
    11. Before breaking the hose connection, always release the pressure in the washer.
    12·经常检查所有的液体。
    12. Check all liquids regularly.
    特别需要注意的是不要让高压超声波清洗机在运转过程中处于无人监管的状态。每次当你释放扳机时泵将运转在旁路模式下。如果一个泵已经在旁路模式下运转了较长时间后,泵里循环水的过高温度将缩短泵的使用寿命甚至损坏泵。所以,应避免使设备长时间运行在旁路模式。
    Particular attention should be paid to the fact that the high-pressure ultrasonic cleaner is not in an unmanned state during operation. Every time you release the trigger, the pump will operate in the bypass mode. If a pump has been running in bypass mode for a long time, the high temperature of circulating water in the pump will shorten the service life of the pump and even damage the pump. Therefore, equipment should be avoided for a long time in bypass mode.
    本文超声波清洗机生产厂家发布,您是不是对这些内容有所了解了呢?更多的内容请点击:http://www.sinokohl.com我们会有更多精彩内容等你查看。
    In this article, the manufacturer of ultrasonic cleaner released, do you know something about these contents? For more information, please click: http://www.sinokohl.com, we will have more wonderful content for you to see.
    上一条:没有了
    下一条:超声波清洗过程中的清洗剂的选择