• 销售:18660171507 (张经理)
  • 传真:0531-68850070
  • 地址:济南市历城区开源路17号
新闻资讯当前位置:首页-新闻资讯
    影响超声波清洗的几大因素
    2018-7-24 17:32:04
    一: 频率针对不同的清洗物件,挑选不同的超声频率。例:五金、机械、汽摩、压缩机等职业或重度污染的一般物件的清洗多选用20KHz频率的清洗器;光学、光电子、线路板、实验室一般器皿多选用40KHz的频率。
    One: frequency for different cleaning objects, select different ultrasonic frequencies. For example: the cleaning of hardware, machinery, steam and compressor, and the general object of heavy pollution is mostly used by the 20KHz frequency cleaner, and the frequency of 40KHz is used in optical, optoelectronic, circuit board and laboratory general utensils.
    二:功率一般标准型产品已设定产品容量与超声功率成正比(超声功率为0.3-0.5W/cm2);高功率产品多用于五金、机械等职业或重度污染的一般物件的清洗(超声功率为0.5-1W/cm2)。

    Two: the power general standard product has set the product capacity and ultrasonic power proportional (ultrasonic power is 0.3-0.5W/cm2); high power products are used in hardware, machinery and other professional or heavy pollution general objects cleaning (ultrasonic power is 0.5-1W/cm2).

    超声波清洗机生产厂家

    三: 时刻不同的清洗物件应设定不同的清洗时刻,超声波清洗机生产厂家挑选合适的时刻(一般清洗时刻为10-20min)有利于对清洗样品的更好清洗;时刻过长会导致清洗样品外表发生空化斑,影响外表光洁度。
    Three: different cleaning items should be set at different times, and the manufacturers select the appropriate time (general cleaning time is 10-20min) for better cleaning of the cleaning samples; the long time will result in the cavitation spots in the appearance of the cleaning sample and the appearance of the appearance.
    四:温度因为每种器材的物理特性不一样,所以我们在清洗时应选定不同的清洗温度,比方油脂类的一般在50℃以上为宜;铝件,一般挑选40℃左右为宜,温度过高,会构成氧化斑;毛刺类的一般选定15℃以下为宜。
    Four: because the physical characteristics of each kind of equipment are different, so we should choose different cleaning temperature when cleaning, for example, it is suitable to be above 50 degrees centigrade. Aluminum parts, usually selected about 40 degrees centigrade, too high temperature, will form oxidation spot, and the type of burr should be selected below 15 centigrade.
    您如果对我们的产品感兴趣或者有任何的疑问,您可以直接给我们留言或直接与我们联络,我们将在收到您的信息后,会第一时间及时与您联络。
    If you are interested in our products or have any questions, you can leave a message directly to us or contact us directly. We will contact you in time for the first time after receiving your information.